ENGINE KIT >8 / 1995 (fitted with aftermarket turbo)

Kit contains:
TP Liners
ARCO pistons
NPR Rings
STONE Gasket set
DAIDO/NDC bearings
SPOOL H Beam conrods
Turbo spec oil squirters
Factory turbo oil cooled crown pistons and conrods with 30mm gudgeon pin to replace original 28mm gudgeon pin type.

*****************WARNING******************
This kit is to suit non turbo engines that have had Aftermarket Turbo set up fitted .

Original 28mm gudgeon pin type pistons have valve reliefs . The factory turbo piston does not . The existing cylinder head will need to have the valve heights modified , otherwise valves will strike pistons .
The original cylinder head has exhaust valve height of 0.305mm - 0.696mm below head surface and Inlet valve height of 0.275mm - 0.675mm below head surface .

The existing cylinder head will need to be modified to suit factory turbo specification piston without valve relief to 0.70mm - 1.30mm below the head surface for both inlet and exhaust valves .

Option of grade 2 or 3 head gasket and Head bolt set

Refer below for piston protrusion specs
option of head gaskets , refer below for piston protrusion specs
22AFD0821 = 1.20mm suits protrusion 0.118mm to 0.168mm (grade 2)
22AFD0822 = 1.25mm suits protrusion more than 0.168mm (grade 3 thickest available)